Titebond Painter's Caulk is an interior use, latex caulk that repairs cracks in plaster/drywall and fills gaps around wood trim, moldings, mantels and baseboards. It is de-aired for a smooth, uniform bead that extrudes and tools easily leaving no residual odor behind. It is a mildew resistant formula that contains no plasticizers or phthalates.

Features & Benefits

  • IDEAL FOR: Sealing joints, repairing cracks and filling gaps for interior applications.
  • SEALS: Wood, metal, glass, masonry, aluminum, brick and most common building materials.
  • Paints & stains easily
  • Dries quickly & provides a watertight seal
  • Pre-paint preparation
  • Minimal odor
  • De-aired for a smoother bead
  • Mildew resistant



Application Guidelines

  • Application Temperature: Above 40°F (4°C)
  • Service Temperature Range: -25°F to 180°F (-31°C to 82°C)
  • Method of Application: Cartridge/caulking gun
  • Working Time: Approximately 10-15 minutes for 1/4” bead
  • Application Directions: 1. Surfaces must be clean and free of any material that may prevent adequate adhesion. Properly designed joint not to exceed 1/2" in width. 2. Cut tip at 45° angle for 1/8" to 1/2" bead and place in cartridge gun. 3. Force caulk into clean joint. If necessary, smooth bead immediately. It is the sole responsibility of the user to thoroughly test any proposed use with all substrates to determine project suitability.
  • Painting: The caulk should be dry to the touch and ready to paint in 2-4 hours.
  • Cleanup: Clean uncured material with water. After curing, excess caulk must be cut or scraped away.
  • Coverage:
    Container 1/8” Bead 1/4" Bead 3/8" Bead 1/2" Bead
    10.1 oz. Cartridge 123 ft. 31 ft. 14 ft. 8 ft.

Physical Properties

  • Type: Latex
  • Calculated VOC: <50 g/L (<1.5%)
  • Color: White
  • Solids: 82%
  • Flashpoint: None
  • Viscosity: 600,000 cps
  • Freeze / Thaw Stability: Stable
  • Storage Life: 24 months in a dry location at or below 75°F.


Not designed for continuous submersion or use below the waterline. Air, caulk and surface temperature should be above 40°F. Cure time is dependent upon ambient conditions including temperature and humidity. The caulk should be dry to the touch and ready to paint in 2-4 hours. It is highly recommended to use backing material. For best results, store in a dry location at or below 75°F.

Product SKUs

Part NumberUPCCase UPCSizeWeightUnits Per PackagePackages Per PalletColor
73010370830730101003708307301710.1 Oz. Cartridge - White14.8212108

Warranty Statement

25 Year Limited Warranty: If not satisfied with product performance when used as directed, return container and proof of purchase to Franklin International, Inc. for replacement of product. Liability is limited to product replacement only.

Important Notice: Our recommendations, if any, for the use of this product are based on tests believed to be reliable. Since the use of this product is beyond the control of the manufacturer, no guarantee or warranty, expressed or implied, is made as to such use or effects incidental to such use, handling or possession or the results to be obtained, whether in accordance with the directions or claimed so to be. The manufacturer expressly disclaims responsibility therefore. Furthermore, nothing contained herein shall be construed as a recommendation to use any product in conflict with existing laws and/or patents covering any material or use.

2020 Bruck Street, Columbus, Ohio 43207
CUSTOMER SERVICE 1-800-669-4583
TECH SERVICE 1-800-347-4583

Franklin International