Titebond TiteGrab™ Plus Construction Adhesive is an easily extrudable, advanced polymer formula designed to instantly grab and hold materials in place. Due to its rapid strength build, TiteGrab Plus significantly reduces installation times and amount of bracing, making it ideal for interior and exterior construction and repair projects that benefit from instant holding power, including vertical applications. This powerful formula reduces the need for fasteners and ultimately achieves a long lasting, durable bond to porous and non-porous materials. In order to instantly adhere a substrate to a vertical surface, 2.5 inches of adhesive is required per pound of substrate.

Features & Benefits

  • Recommended For: Demanding interior/exterior construction, installation and repair projects that benefit from instant grab properties.
  • Compatible Materials: Common building materials including concrete, metal, wood, marble, foam board, OSB, ceramic tile, cement board, brick, stone, painted surfaces, tub surrounds, mirrors, flooring, moldings and more.
  • Ultimate instant grab and holding power
  • Significantly reduces installation times and need for fasteners
  • Fast strength development
  • Easy handling and extrusion
  • Multipurpose versatility
  • Bonds virtually any material
  • Vertical applications
  • Waterproof
  • Will not shrink or brittle with age
  • All weather

Application Guidelines

  • Application Temperature: 0°F - 120°F, 60°F - 90°F for best results. Above 90°F, use additional support for 24 hours.
  • Working Time: 5 - 10 minutes depending on temperature and humidity
  • Prep: Surfaces must be clean and free of any material that may prevent adequate adhesion.
  • Application: Remove v-notch nozzle and cut tip of nub. Puncture foil seal and screw v-notch nozzle back onto cartridge. Extrude adhesive with cartridge held at 90° angle and nozzle lightly contacting surface, ensuring that the included v-notch nozzle will produce the correct bead shape. If extruded correctly, the bead should have a pointed ridge. Apply adhesive based on substrate weight, staying 1/2 inch from the outside edge. Minimum bead length is 2.5 inches per pound of substrate. Distribute bead evenly across back of substrate. Press surfaces firmly together with a twisting motion and firmly hold for 5 seconds. NOTE: Large applications may require temporary or permanent bracing. For questions, contact Technical Service at 1.800.347.4583.
  • Cleanup: Tools and adhesive may be cleaned with acetone or mineral spirits when uncured. Follow solvent vendor’s precautions. Once cured, adhesive must be scraped from surfaces.



Size V-Notch Nozzle
9 Oz. Cartridge 199 in.

Bead Length Calculation

The chart below calculates the amount of adhesive needed to instantly hold specific weights. This list is not inclusive of all substrate weights TiteGrab Plus can hold. TiteGrab Plus will instantly hold a substrate on a vertical surface as long as the substrate has enough surface area for the required linear inches. 2.5 inches of adhesive is required per pound of substrate.
Substrate Weight in Pounds Linear Inches of Adhesive Required
1 2.5
3 7.5
5 12.5
10 25
15 37.5
20 50

Physical Properties

  • Type: Advanced polymer
  • Color: Cream
  • Solids: 99%
  • Viscosity: 1,000,000 cps.
  • Calculated VOC: < 50 g/L
  • Flashpoint: > 212°F
  • Storage Life: 12 months
  • Odor: Low


Do not use when temperature or materials are below 40° F. Not recommended for applications on PE, PP, PC, PMMA, PTFE, neoprene and bituminous substrates. Not suitable as joint sealant. Not intended for use around pools, chlorides or for continuous submersion. Not intended for direct contact with flames or fire brick. Yellowing may occur in the dark. For heavier materials, extreme temperatures may affect bond integrity. For mirrors and other heavy vertical applications, mechanical fasteners may be required and are recommended. Prime porous substrates for stronger adhesion. It is the user’s responsibility to determine suitability. Always check with your local code officials before installation. For additional questions or recommendations, please contact Technical Service at 1.800.347.4583 or visit us at Titebond.com.

Product SKUs

Part NumberUPCCase UPCSizeWeightUnits Per PackagePackages Per Pallet
6701037083067019100370830670169 Oz. Cartridge13.6412108

Important Notice: Our recommendations, if any, for the use of this product are based on tests believed to be reliable. Since the use of this product is beyond the control of the manufacturer, no guarantee or warranty, expressed or implied, is made as to such use or effects incidental to such use, handling or possession or the results to be obtained, whether in accordance with the directions or claimed so to be. The manufacturer expressly disclaims responsibility therefore. Furthermore, nothing contained herein shall be construed as a recommendation to use any product in conflict with existing laws and/or patents covering any material or use.

2020 Bruck Street, Columbus, Ohio 43207
CUSTOMER SERVICE 1-800-669-4583
TECH SERVICE 1-800-347-4583

Franklin International