TITEBOND ROOF PLUS SEALANT


Titebond Roof Plus Sealant is a water-resistant, solvent-based, elastomeric rubber sealant designed for roofing applications such as asphalt shingles, metal trim, solar roof systems, architectural metals, painted metals, aluminum and general roofing applications. It is resistant to dust, dirt and stains and is paintable. Sealant can...

more

Features & Benefits

check_circle
IDEAL FOR: Sealing metal trim, solar roof systems, architectural metals and general roofing applications.
check_circle
SEALS: Metal, aluminum, asphalt, shingles, masonry, wood and most common building materials.
check_circle
Fast drying
check_circle
Designed for dynamic joint movement
check_circle
Tools and cleans up easily
check_circle
Adhesive or sealant use
check_circle
Excellent performance and flexibility on most materials
check_circle
Exceptional flexibility - Will not crack
check_circle
UV resistant

Application Guidelines

Application Temperature:
Above 20°F (-7°C)
Service Temperature Range:
-40°F to 180°F (-40°C to 82°C)
Method of Application:
Cartridge/caulking gun
Tooling Time:
For a 1/4" bead, approximately 10-15 minutes
Working Surfaces:
1. Surfaces must be clean and free of any material that may prevent adequate adhesion. 2. Cut tip to desired bead width and shape and place in cartridge gun. 3. Apply generously as needed. It is the sole responsibility of the user to thoroughly test any proposed use with all substrates to determine project suitability.
Painting:
The sealant should be dry to the touch and ready to paint in 2 hours
Cleanup:
Clean uncured material with xylene or equivalent solvent. After curing, excess sealant must be cut or scraped away. Follow solvent vendor's precautions when using solvents.
Coverage:
Container 1/8” Bead 1/4" Bead 3/8" Bead 1/2" Bead
10.1 oz. Cartridge 123 ft. 31 ft. 14 ft. 8 ft.
Limitations:
Air, sealant and surface temperature should be above 20°F. Cure time is dependent upon ambient conditions including temperature and humidity. The sealant should be dry to the touch and ready to paint in 2 hours. Do not thin or use for exterior glazing. For best results, store in a dry location at or below 75°F.

Physical Properties

Type
Synthetic Elastomeric Rubber
Calculated VOC
315 g/L (32%)
Color
Clear
Solids
68%
Flashpoint
80°F
Viscosity
700,000 to 1,000,000 cps.
Freeze / Thaw Stability
Stable
Storage Life
24 months in a dry location at or below 75°F

Specifications

Exceeds:
  • ASTM C920 Type S Grade NS Class 12.5 Use T, NT, M, A and O
  • Federal Specification TT-S-00230C Type II Class B

Warranty Statement

Liability is limited to product replacement only.